Description
Designed to fit perfectly with the Triple-wall Heat Protector Chimney 3.5″ and the Triple-wall Heat Protector Chimney for External Air M-sized Stove 3.1″
the Winnerwell Flashing Kit Large is made from silicone which resists high temperatures 240 ℃ and is held in place by stainless steel rings with six wing nuts. This Flashing Kit Large can be used to create a weather-tight seal on existing stove jacks or when installing a stove jack in a 5m Classic tent or shelter.
WARNING: The Flashing Kit must be used with Triple-wall Heat Protector Chimney 3.5” or Triple-wall Heat Protector Chimney for External Air M-sized Stove 3.1″. There is a risk of melting if you install the Flashing Kit on the stovepipe directly.
Flashing Kit must be installed at the position below the 5th row of the holes of the Heat Protector Chimney. If there’s an installation angle, please make sure that any position of the Silicone part of the Flashing Kit must be below the 5th row of these holes as well. We recommend purchasing Winnerwell® Short Pipes separately for height adjustment to meet the above-specified position requirement.
WARNING: Temperature at the top part of the Heat Protector Chimney is high, the Silicone part must avoid the position of the upper cooling holes.
Features
- To be used with triple-walled heat protector chimney
- Resists temperatures of 240 ℃
- Creates a weather-tight seal for installed stove jacks
Additional info
Material:
Silicone collar + AISI304 Stainless Steel rings
Inner Diameter:
150mm / 5.9in
Outer Diameter:
260mm / 10.2in
Height:
112mm / 4.4in
Net Weight:
0.6kg / 1.3lbs