Winnerwell Flashing Kit
$77 – $95Price range: $77 through $95
Description
The Winnerwell Medium Flashing Kit is designed to fit perfectly with the Winnerwell Triple-wall Heat Protector Chimneys (2.1″, 2.5″). Made from high-temperature resistant silicone (up to 240°C) and secured with stainless steel rings and six wing nuts, this kit provides a weather-tight seal. It’s ideal for use with existing stove jacks or when installing a stove jack in tents or shelters.
The Large Flashing Kit is designed to fit with the Triple-wall Heat Protector Chimney 3.5″ and the Triple-wall Heat Protector Chimney for External Air M-sized Stove 3.1″
WARNING: The Flashing Kit must be used with a Triple-wall Heat Protector Chimney. There is a risk of melting if you install the Flashing Kit on the stovepipe directly.
Flashing Kit must be installed at the position below the 5th row of the holes of the Heat Protector Chimney. If there’s an installation angle, please make sure that any position of the Silicone part of the Flashing Kit must be below the 5th row of these holes as well. We recommend purchasing Winnerwell Short Pipes separately for height adjustment to meet the above-specified position requirement.
WARNING: Temperature at the top part of the Heat Protector Chimney is high, the Silicone part must avoid the position of the upper cooling holes.
Features
- To be used with triple-walled heat protector chimney
- Resists temperatures of 240 ℃
- Creates a weather-tight seal for installed stove jacks
Additional info
Material:
Silicone collar + AISI304 Stainless Steel rings
Large
Inner Diameter: 150mm / 5.9in
Outer Diameter: 260mm / 10.2in
Height: 112mm / 4.4in
Net Weight: 0.6kg / 1.3lbs
Medium
Inner Diameter: 122mm / 4.8in
Outer Diameter: 220mm / 8.7i
Height: 92mm / 3.6in
Net Weight: 0.53kg / 1.17lbs